Model

Boaray 600D

Boaray 600C

Dimensions and weight

Main unit: 1385 mm (H) × 850 mm (W) × 633 mm (D), 80 kg (without vaporizer and cylinder)

Top shelf: 535 mm (W) × 382 mm (D), limit 34 kg

Drawer: 150 mm (H) × 338 mm (W) × 308 mm (D)

(internal size), quantity: standard 2

Drawer: 150 mm (H) × 338 mm (W) × 308 mm (D)

(internal size), quantity: standard 1, optional 2

Caster: 100 mm, two front casters with brakes

Ventilation mode

VCV, PCV, SIMV(V)+PS, SIMV(P)+PS, Manual, Standby

CPAP / PSV (optional)

VCV, PCV, Manual, Standby

Compensation

Circuit gas leakage compensation and automatic compliance compensation

Ventilation parameters

Patient type: adult, pediatric, infant

Tidal volume:

(pediatric / infant) 20 ~ 300 ml, (adult) 100 ~ 1500 ml

(increments of 5 ml)

Tidal volume:

(pediatric / infant) 40 ~ 300 ml, (adult) 100 ~ 1500 ml

(increments of 5 ml)

Pinsp: 5 ~ 70 cmH₂O (increments of 1 cmH₂O)

Plimit: (PEEP + 5) ~ 70 cmH₂O (increments of 1 cmH₂O)

Freq in SIMV mode: 1 ~ 40 bpm, others mode: 4 ~ 60 bpm

(increments of 1 bpm)

I : E: 3 : 1 ~ 1 : 6 (increments of 0.5)

Tpause: OFF, 5 % ~ 50 % (increments of 5 %)

Ti: 0.1 ~ 10.0 s (increments of 0.1 s)

Flow trigger: 1 ~ 15 L/min (increments of 1 L/min)

Psupp: 5 ~ 60 cmH₂O (increments of 1 cmH₂O)

Positive end expiratory pressure

(PEEP)

Type: integrated, electronic controlled

/

PEEP: OFF, 4 ~ 20 cmH₂O (increments of 1 cmH₂O)

Ventilator performance

Driving pressure: 280 kPa to 600 kPa

Peak gas flow: 120 L/min + fresh gas flow

Monitoring parameters

Minute volume: 0 ~ 60 L/min

Tidal volume: 0 ~ 2000 ml

FiO₂: 21 % ~ 100 %

Ppeak: 0 ~ 100 cmH₂O

Pmean: 0 ~ 100 cmH₂O

Pplate: 0 ~ 100 cmH₂O

I : E: 3 : 1 ~ 1 : 6

Rate: 0 ~ 100 bpm

PEEP: 0 ~ 70 cmH₂O

Resistance (R): 0 ~ 200 cmH₂O / (L/s)

Compliance (C): 0 ~ 200 ml/cmH₂O

Control accuracy

Volume delivery:

< 100 ml: ± 20 ml

≥ 100 ml: ± 20 ml or ± 15 % of the set value, whichever is greater

Pressure delivery: ± 2.0 cmH₂O or ± 10 % of the set value, whichever is greater

PEEP delivery: ± 2.0 cmH₂O or ± 10 % of the set value, whichever is greater

Monitoring accuracy

Volume monitoring:

< 100 ml: ± 20 ml

≥ 100 ml: ± 20 ml or ± 15 % of the reading, whichever is greater

Pressure monitoring: ± 2.0 cmH₂O or ± 10 % of the reading, whichever is greater

PEEP monitoring: ± 2.0 cmH₂O or ± 10 % of the reading, whichever is greater

Log

500 events storage, first in first out

Alarm settings

Tidal volume

High: 40 ~ 1500 ml, OFF

Low: OFF, 140 ~ 1500 ml

Minute volume

High: 1 ~ 40 L/min, OFF

Low: OFF, 1 ~ 40 L/min

Airway pressure

High: 1 ~ 100 cmH₂O

Freq

High: 1 ~ 60 bpm, OFF

Low: 0 ~ 60 bpm

FiO₂

FiO₂

Apnea alarm: 10 ~ 40 s

Sustained airway pressure alarm: 15 s

Negative pressure alarm: Paw < - 10 cmH₂O

Alarm silence countdown timer: 120 to 0 seconds

System language

Chinese, English, Spanish, French, Portuguese

Flow sensor

Type: variable orifice flow sensor

Position: inspiratory and expiratory port

Oxygen sensor

Type: chemical

FiO₂ displayed: 21 % to 100 %

Accuracy: ± (volume fraction of 2.5 % + 2.5 % gas level)

Response time: ≤ 15 seconds

Ventilator screen

Display type: color TFT touch screen, integrated

Display size: 8.4 inch

Resolution: 800 × 600

Display parameter: all setting and alarm parameters

(including Frequency, I/E ratio,

Tidal volume, Minute volume, PEEP,

Pmean, Ppeak, Pplat, and FiO₂, EtCO₂)

Display parameter: all setting and alarm parameters

(including Breath rate, I/E ratio,

Tidal volume, Minute volume, PEEP, MEAN,

PEAK, PLAT, and O₂ concentration, EtCO₂)

Display waveform: P-T, F-T, V-T, CO₂-T (optional)

Display waveform: P-T, F-T, V-T

Loop:P-V, F-V and F-P

/

Timer: on screen timer

Communication port

RS-232C connector × 1

Vaporizer

Vaporizer brand: YAFMED anesthetic vaporizer or Penlon Sigma Delta anesthetic vaporizer

Support agent: Halothane, Enflurane, Isoflurane, Sevoflurane

Position: standard 1, optional 2

Mounting mode: Selectatec^®, with interlocking function

Fill method: Key fill, Pour fill, Quick fill

Mainstream CO₂ module

(Masimo IRMA)

Displayed numeric: EtCO₂, FiCO₂

/

Measurement range: 0 ~ 99 mmHg

Accuracy: ± (0.3 vol % + 4 % of reading)

Waveform / loop: CO₂-time

EtCO₂ high alarm limits: 1 ~ 100 cmH₂O

EtCO₂ low alarm limits: 0 ~ 99 cmH₂O

Multi-gas module

(Masimo IRMA)

Measurement mode: main-stream

/

Monitor gas: monitor gases CO₂, N₂O, Halothane,

Warm-up time: < 20 sec

(concentrations are reported and the automatic

agent identification is running within 20 seconds)

Accuracy:

CO₂: ± (0.3 vol % + 4 % of reading)

Power and battery backup

Power input: 110 ~ 240 V AC, 50 / 60 Hz

Auxiliary electrical outlet: up to 3 outlets (1.5 A for each)

Battery backup: 60 min for backup battery

(powered by new fully-charged batteries with 25 ℃ ambient temperature)

Battery type: build-in Li-on battery, 11.1 VDC, 7800 mAh

Safety feature: in case of electricity and battery failure, manual ventilation,

gas delivery and agent delivery are possible

ACGO

(Auxiliary Common Gas Outlet)

Connector size: ISO 22 mm OD and 15 mm ID

Pipeline supply

Gas type: O₂, N₂O, Air

O₂ & N₂O or O₂ & Air

Pipeline input range: 280 to 600 kPa

Pipeline connection: NIST

Pipeline supply pressure gauge

Display type: mechanical

Range: 0 to 1 MPa

Accuracy: ± (4 % of the full scale reading + 8 % of the actual reading)

Cylinder supply

Cylinder type: E-size cylinder (US standard or UK standard)

O₂ input range: 400 to 450 MPa

N₂O input range: 400 to 450 MPa

Cylinder connection: Pin-Index Safety System (PISS)

Yoke configuration: O₂, N₂O

Cylinder supply pressure gauge

Display type: mechanical

O₂ range: 0 to 25 MPa

N₂O range: 0 to 25 MPa

Accuracy: ± (4 % of the full scale reading + 8 % of the actual reading)

O₂ control

Method: N₂O shut off with loss of O₂ pressure

O₂ flush: 25 ~ 75 L/min

O₂-N₂O link system

Type: mechanical

Range: O₂ concentration not lower than 21 %

Auxiliary O₂ flowmeter

Range: 0 ~ 15 L/min

/

Indicator: flow tube

Mechanical control flow meter

O₂ flow range: two flow tubes with the range of 0 ~ 1 L/min and 1 ~ 10 L/min

N₂O flow range: two flow tubes with the range of 0 ~ 1 L/min and 1 ~ 10 L/min

Air flow range (optional): one flow tube with

the ranges of 1 ~ 10 L/min

Air flow range: two flow tubes with the range of

0 ~ 1 L/min and 1 ~ 10 L/min

Accuracy: ± 10 % of the indicated value (flow between 10 % and 100 % of full scale)

± 200 ml/min (for the flow under 10 % of the full scale)

Operating environment

Temperature: 10 ~ 40 ℃

Relative humidity (non-condensing): 15 % ~ 95 % R.H.

Atmospheric pressure: 70 ~ 106 kPa

Storage and transport environment

Temperature: - 20 ~ 55 ℃

Relative humidity (non-condensing): 10 % ~ 93 % R.H.

Atmospheric pressure: 50 ~ 106 kPa

Electromagnetic compatibility

Immunity: complies with all requirements of IEC 60601-1-2

Emission: complies with all requirements of IEC 60601-1-2

Breathing system

Material: PC

CO₂ Absorber

Absorbent capacity: 1500 ml

Breathing circuit parameters

Compliance: 0.87 ml/100Pa (bag mode)

Automatically compensates for compression losses within the breathing circuit in mechanical mode.

Expiration resistance: < 0.6 kPa @ 30 L/min

Inspiration resistance: < 0.6 kPa @ 30 L/min

System pressure gauge

Range: - 20 ~ 100 cmH₂O

Accuracy: ± (2 % of the full scale reading + 5 % of the actual reading)

Ports and connector

Exhalation, Inhalation, Manual bag port: 22 mm OD / 15 mm ID conical

APL valve

Range: 2 ~ 70 cmH₂O

Tactile knob indication at above 30 cmH₂O.

Accuracy: ± 10 cmH₂O or ± 15 % of the setting value, which is greater

Anesthetic Gas Scavenging System

(AGSS)

Size: 480 mm (H) × 134 mm (W) × 95 mm (D)

Type of disposal system: low flow active AGSS

Applicable standard: ISO 80601-2-13

Pump rate: 40 ~ 50 L/min

Connector of the disposal system: ISO 9170-2